Plug Wires for 4th gen

[Trainman]

Hey guys -- I am getting close to replacing my stock plug wires. Any ideas? Stay with stock GM parts for my essentially stock LS1 set-up or something else?? Thanks.:)

[Camaro6662]

What you are looking at stay stock :D

I would start with cam, headers GMMG chambered exhaust ,lowering springs biltstein shocks,brake upgrade new BFG force KD and Rims Subframe connectors,strut tower brace had enough yet:D

[Trainman]

Just the plug wires and a tune to start with. Any recommendations on wire sets?

[D21458P]

Tom, I'm using Taylor wires. They are huge. Haven't had any problems. I've used their wires on a few of my vehicles.:cool:

[97Z28M6]

i've got Taylor's also, but i have an LT1, so i dunno how they are for the LS1

[Trainman]

Dean et al. --- Thanks for Taylor wire tip. Available locally or sold on Internet only?
Tom

[Trainman]

98 99 00 01 02 Chevy Camaro Spark Plug Wires #84044
http://www.autopartswarehouse.com/images/apw_performance/images/taylor_cable/thundervolt82black.jpghttp://www.autopartswarehouse.com/images/apw_performance/logos/taylor-cable.gifTaylor Cable Spark Plug Wires

TAYLOR CABLE IGNITION WIRE SET, THUNDERVOLT 8.2MM, BLACK -- Thunder Volt 8.2mm Ultra High Performance Ignition Wire Set, Custom Fit, More Horsepower And Better Fuel Mileage, 100% Silicone 2-Layer Jacket, Black, Increases Horsepower, Dyno Tested To Outperform The Competition, Superior Spark Energy, RFI & EMI Compatible For All Ignition Systems, Ferrite Spiral-Wound Coated Core

[D21458P]

Tom, mine came from Summit. 79203- red 10.4 LS1. they sold for 57.69. Hope this helps. Direct replacement. Took old one off put new one on.:cool:

[outlaw77LT]

I've run taylors for 13 years, never a problem in any set. I run one set of msd's on my Camaro w/ a HEI. The boots on the msd's are trick, thick, and they mold MSD ignition on the plug end. Looks great and are also bout 25.00 more. Now i'm running Taylors on a Mallory Unilite, Hifire box, MSD soft touch and a blaster 2:cool:

[Trainman]

Thank you Dean and Mister Outlaw. The internet price on the ones I posted were about $70 +s/h. Does the 8.2 refer to diameter of wires in mm? And are the 10.4's better?? Kinda like it if they were red. Dean -- yours red?

[Flawless]

Yeah Deans are Red. The 8.2 and 10.4 does stand for the diameter in mm. No bigger is not better, some just offer more shielding, not really a most have. I have the 8.5 MSD, these are red too. Both are good wires!

[outlaw77LT]

8.2mm is plenty for a stock ignition.If you got a 6al or hotter box the 10's would be better. the 10's look sweet tho. i have no idea how they are on radio noise

[fast12]

Go back with stock wires.They are your best bet.